產品簡介Product Introduction
設備利用“閃蒸”技術將過氧化氫液體迅速變成過氧化氫氣體，經過設備頂部的螺旋送風模塊，最大限度的實現過氧化氫蒸汽在密閉空間內的擴散，確保過氧化氫蒸汽在目標空間的均勻分布。
The equipment uses the "flash evaporation" technology to quickly turn hydrogen peroxide liquid into hydrogen peroxide gas, which passes through the spiral air supply module on the top of the equipment to maximize the diffusion of hydrogen peroxide vapor in the confined space and ensure the uniform distribution of hydrogen peroxide vapor in the target space.
產品特點Product Features
完善的產品架構Comprehensive Product Architecture
設備可選配汽化模塊、通風模塊、濃度檢測模塊，各模塊采用無線通訊，主機協調控制，為大空間、多房間滅菌提供整體解決方案。
The equipment can be equipped with vaporization module, ventilation module, and concentration detection module. Each module adopts wireless communication and coordinated control of the host, providing an overall solution for sterilization in large spaces and multiple rooms.
數據可追溯性Data Traceability
設備配有針式打印機和西門子屏，具備電子簽名、電子記錄、審計追蹤等功能。
The equipment is equipped with a needle printer and a Siemens screen, with functions such as electronic signature, electronic recording, and audit tracking.
操作便捷性Convenience of Operation
采用Ipad遠程操作，人員可在滅菌區域外實現對設備的監控與操作。設備自動運行，滅菌過程無需人工干預。
By using Ipad remote operation, personnel can monitor and operate the equipment outside the sterilization area. The equipment operates automatically, and the sterilization process does not require manual intervention.
滅菌能力強Strong Sterilization Ability
利用“閃蒸”技術將過氧化氫液體迅速變成過氧化氫氣體，并通過設備擴散系統將其擴散到目標空間，理論滅菌體積可達500 m3以上。
Using "flash evaporation" technology to quickly convert hydrogen peroxide liquid into hydrogen peroxide gas, and diffuse it to the target space through the equipment diffusion system, with a theoretical sterilization volume of up to more than 500 m3.
設備安全性Equipment Safety
設備配有完善的過氧化氫濃度檢測功能。主機配有固定式過氧化氫濃度探頭，用于滅菌區域內的實時參數監控。同時配有手持式過氧化氫濃度探頭，用于人員進入滅菌區域前的安全防護。
The equipment is equipped with a comprehensive hydrogen peroxide concentration detection function. The host is equipped with a fixed hydrogen peroxide concentration probe for real-time parameter monitoring in the sterilization area. Equipped with a handheld hydrogen peroxide concentration probe, it is used for safety protection before personnel enter the sterilization area.
工藝流程Technological Process
除濕階段Dehumidification stage
在開始向目標空間加注過氧化氫蒸汽之前，空調系統將目標空間內的相對濕度控制在45%以下，溫度控制在25℃以上，為程序進入調節階段做準備。
Before the mobile vaporized hydrogen peroxide sterilizer begins to inject hydrogen peroxide vapor into the target space, the air conditioning system controls the relative humidity in the target space to below 45% and the temperature to above 25 ℃, preparing for the program to enter the adjustment phase.
調節階段Regulation stage
提升濃度階段，設備持續向目標空間加注過氧化氫蒸汽，直至達到滅菌所需濃度。
During the concentration increase phase, the equipment continues to inject hydrogen peroxide vapor into the target space until the required concentration for sterilization is reached.
滅菌階段Sterilization stage
悶消階段，在此階段維持目標空間的過氧化氫濃度至滅菌完畢。
During the sterilization stage, maintain the hydrogen peroxide concentration in the target space until sterilization is completed.
通風階段Ventilation stage
空調系統開啟排殘模式，迅速降低目標空間過氧化氫濃度至安全水平。
The air conditioning system activates residual removal mode, quickly reducing the hydrogen peroxide concentration in the target space to a safe level.
